• Meets UL 325 Specifications.

• Frame / Gate: 2" Sq., I I Ga. (.120) Steel
• Tubing Vertical Pickets: 3/." Sq., 16 Ga. Galv. Tubing
• Chain Link: 2-3/8", Sch. 40 & Sch. 20 Tubing II Ga. Fabric
• Operator Skins: 18 Ga. Galvaneal Sheet
• Mounting Pads: 304 SS

RUSTPROOFING & LUBRICATION:

• All internal Operator Parts, Springs, Spring Adjustment Tube, Adjustment Screws are rustproofed wftexaco Compound "L". All moving parts are built with factory installed grease fiftings for proper P/M

• Polane Semi-Gloss / Spatter Finish. Standard Colors: Black, White, Brown & Green (Custom colors available).

• Gate mounting hardware is s.s.

• 100 mph design, 1/4" aircraft quality coated cable.
• Length= 60% of gate

• Type: VPL-24
• Length: 68"
• Height: 51"
• Width: 36"

• 10'-24' (Consult factory over24').

• 4'- 12'from pad grade (Gates over 8'vAll require special crating & freight arrangements).

• Continuous.

• Dynamic Built-in Motor Braking.

• 120v AC with 24v DC Battery Back-Up. (2) 12v Batteries required, NOT included.

• 24v Built-In Battery Maintainer keeps Batteries charged.
• Over-Charge" protection built-in.

• Solid state coated Control Board in NEMA 4x weatherproof electrical enclosure.
• Sealed proximity Switches ensure weather & moisture-proof integrity (Boards tested to -40 degree F).

• Horse Power: 1/3
• Gear Type: Hardened Steel
• Bearing Type: Ball
• Gear Lube: Dextron 11 E ATF (Rated to -7011 F)

• Control Panel can be set to accommodate 2nd
• Operator or Sallie Port with another Operator
  (Optional Add).

• 7 - 9 seconds.

• Adjustable from 0 - 60 seconds.

• Adjustable IRD senses obstructions opening or closing.

• 24v built-in System Brake as 120v or battery power is present.

• Reversing/Safety Loop, Leading Reversing Edge, Infra-Red Reversing Beams, Siren Operated Sensor.

• Typical VPL-24 Operator with 6' high x 16' long Buckeye style gate = 1,000 lbs.