|
|
The
Falcon XL
- Low
Mounting Industrial Motion Sensor, Mounting Height 7'-11.5'
- Fully
Customizable to your application:
- The
falcon will allow uni- or bi-directional sensing, and the
unique ability to open a door when traffic is moving away
from the sensor.
- The
Sensor can also be set to discriminate between pedestrian
and vehicular traffic.
- An
excellent alternative to loop detectors.
- Universally
compatible with and gate or industrial door:
- Whether
your application is an industrial slide gate or swing gate
or a simple GTO/PRO 1000 post mount the sensor can be set
vertically from 0 to 180 degrees.
- There
is an optional extension bracket that allows the Falcon to
be mounted up to 3 ft. away from the gate.
- Tough
construction to handle the most extreme conditions:
- The
ABS/Polycarbonate construction is NEMA-4 rated [completely
dustproof and weatherproof], can operate from -22 to 140 degree
F and offers high immunity to electrical, mechanical, weather-related,
and radio interferences.
|
-
Fast
and Easy to set up and tune:
- After
mounting the Falcon, you can put your ladder away. All
key parameters of the sensor such as sensitivity, relay,
hold time and configuration, pedestrian discrimination,
and detection mode- can be made via remote control.
- Once
set, adjustments can easily be made from ground level.
-
Saves
energy and increases productivity:
- The
falcon's state-of-the-art microprocessor and flat antenna
provide the ability to disregard pedestrians and only
allow large masses (such as trucks and forklifts) to be
detected even at lower mounting heights. In addition,
the Falcon is capable of disregarding traffic parallel
to the door, which can open a door unnecessarily.
|
