The AM-3 4-portal Access Controller is designed for use as a primary access control device for gated communities, parking garages, Storage Unit Facilities, office buildings, apartments, dormitories, hotels/motels, commercial buildings and recreational facilities.

 

Housed in a lockable, plastic enclosure, the AM-3 features a 2-digit LED display, nine status indicators, four relay indicators with four relay activation pushbuttons. Three programming buttons, a reset button, and a power indicator are present. The enclosure is monitored with a magnetic tamper switch.

 

The system controls its four output relays by responding to various input devices that react to proximity cards, transmitters, and entry codes. The four relay output channels can be programmed to control electric door strikes, magnetic locks, door & gate operators, or barrier gates.

 

Access is granted or denied depending on the current user’s authorization to gain access and system settings that control groups of users or all users. Complete access control event logging, access time restriction, access location restriction, and administration functions are also available to manage the installation.

• Four General-Purpose Form “C” Relays for
  Main and Auxiliary Control Functions
• Networkable — Up to Eight Controllers and
  256 Doors or Gates
• Compatible with Linear’s AE-1000 and AE-2000
• Telephone Entry Systems
• Accepts Two 26, 30, or 31-Bit Wiegand Devices and Six Additional Addressable Remote Devices
• Lockable Plastic Enclosure for Indoor Use
• Optional NEMA 3R Enclosure for Outdoor Mounting

AM-3

4-portal Access Controller

$659.00

Features

• Full control of 4 doors; each supporting request to exit and door status monitoring
• 10,000 Cardholders
• 46,500 block enrolled cards; 20,000 individual cards
• 46,500 block enrolled transmitters; 20,000 individual transmitters
• 20,000 entry codes
• 20,000 event transaction log
• Direct input for 2 card readers; add AM-CRI's for more
• Local programming using a PC and AccessBase2000 at 33.6 Kbps
• Remote programming using optional ACM-1 modem (ACP00905) and AccessBase2000 at 33.6 Kpbs
• 32 security levels, 32 time zones, 32 door schedules, and 24 holiday schedules
• Relay auto lock/unlock schedules
• Automatic door relock when door sense input is used
• Extensive ESD and lightning protection of all inputs and outputs
• Cabinet tamper switch included; tamper events are tracked in the event log.
• All data memory is non-volatile FLASH with data retention in excess of 10 years
• RF frequency: 318 MHz
• 11.5" W x 12.5" H x 4" D

General Specifications

Case Shown is additional.

POWER
12/24 VAC or VDC; 16 VAC transformer included

OPERATING TEMPERATURE
-22° to +149°F

DIMENSIONS
11.5 in L x 4 in W x 12.5 in H (292 x 102 x 318 mm)

MEMORY
10,000 users; each can have keypad, entry code, card or
transmitter; 20,000 event transaction log; data stored in
field upgradeable FLASH memory

CLOCK/CALENDAR
Built-in 24-hour clock/calendar with battery back-up and
daylight savings adjustment

STANDARD EQUIPMENT
AM-3 four portal access control system accepts two
Wiegand inputs and up to six remote devices

ACCESS CONTROL
32 Validation Groups (Security Levels): Validation
Groups let user allow or deny access based on date/time
(Time Zones), door (Door Schedule), or floor (Floor
Schedule); 32 Time Zones, 32 Door Schedules, 32 Floor
Schedules

OUTPUTS
Relay: four Form “C” relays; all can be configured for
open/close; all relay contacts have extensive RFI,ARC and
lightning suppression
RS232: for local computer communications — 33.6 Kbps

DISPLAY
Front Panel: two 8-segment LED displays for system
configuration, status and troubleshooting

INPUTS
PBUS: three sets for connecting up to six proprietary
addressable devices
Wiegand: two sets of Wiegand inputs for connecting 26,
30, or 31 bit Wiegand devices; each Wiegand input
supports two LEDs
Request To Exit: four normally open inputs; each input
assigned to specific relay Door Status: four normally closed inputs used to monitor
the status of the device connected to the relay for a
forced door/propped door alarm; supports auto-relock
once the device is restored
Access Buttons: four pushbuttons used to manually
control each of the four relays
Tamper: N/C tamper switch activates any time cabinet is
opened
LEDs: for status and troubleshooting

CONNECTIONS
All connections grouped together in neighborhoods for
ease of installation and maintenance

ENCLOSURE
Plastic cabinet suitable for indoor use; secure with
lock/key (included) or screws

OPTIONAL EQUIPMENT
ACM-1: plug-in 33.6 Kbps modem for remote (dial-up)
communications.
MIO Interface Module: multiple input/output modules
for monitoring and control of additional points; can also
be used for elevator control (call for availability)
CAB-3: lockable NEMA 3R enclosure for mounting the
AM-3 outdoors