|
Automatic
Swing Gate Operator Series
The
GTO/SW4000 Model Residential Swing Automatic Gate Openers
for light commercial single or double residential gates

Manual
Features
of the Pro SW4000XL Automatic Gate Opener
Designed
for Chain link, Tubular steel or
Ornamental Iron gates for residential, ranch or light industrial
use.
- Handles gates up to 16' (4.88 m) long, up to 650 lbs. (226.8 kg) each leaf.
- Full systems capable "add on ready" heavy-duty control board includes adjustable obstruction sensing, gate sequencing, and auto closing settings (0-120 seconds).
- High cycle capability with true soft start and stop operation.
- New sleek design with continental appeal
- Full access ready package includes battery, radio receiver, entry transmitter, AC transformer, and all necessary mounting hardware for a complete installation.
- Accommodates push or pull-to-open installations.
- Solar option available
- UL Rated for Class I, II, III and IV system certified to be in compliance with UL 325, 4th edition.
GTO/PRO SW4000XL
Automatic Gate Operator 
Guaranteed
Lowest Prices on the Internet...
Now
ONLY 1,105.00
Now ONLY $749.71
GTO/PRO SW4000XL/SW4200XL swing gate openers. The GTO/PRO SW4200XL works as a "slave" automatic gate operator when installed with the GTO/PRO SW4000XL. The PRO SW4200XL will work on gates that are 3.5 ft. to 16 ft. in length, and weighing up to 650 lb. The PRO SW4200XL wires into the "master" control box; the control board can be programmed for dual gate operation and the sequencing of the two gates. The PRO SW4200XL includes: operator arm w/ 50 ft. power cable, second operator wiring harness, mounting hardware, caution signs.
Slave
unit available for only $566.00

Description |
List Price |
Your Price |
Buy Now |
PRO-SW4000XL
Gate Opener (Master) |
$1,105.00
|
$749.71 |
|
PRO-SW4200XL
Gate Opener (Slave) |
$715.00
|
$566.00 |
|
Push-to-Open Post Pivot Bracket
(For standard operator/brackets only) |
$96.50
|
Warning: mysql_result() [function.mysql-result]: Unable to jump to row 0 on MySQL result index 9 in /home/fenceit/public_html/automatic-gate-openers.net/GWISstoreutils.php on line 410
$0.00 |
|
Heavy-Duty Bracket Kit w/ Hardware Bag
Upgrades the operator to handle 1000 lb
& 20ft max gate. Also acts as push to open.
(Includes HB4000 and H200HD) |
$224.00
|
Warning: mysql_result() [function.mysql-result]: Unable to jump to row 0 on MySQL result index 10 in /home/fenceit/public_html/automatic-gate-openers.net/GWISstoreutils.php on line 410
$0.00 |
|
Standard SW4000XL

Note: This model cannot be accommodated for column mounting when the distance of
lines A & B (in picture above) combined length is greater than 14 inches.
The GTO/PRO SW4000XL can accommodate the combined length over 14 inches.
SW4000XL with Heavy-Duty Brackets upgrade
Note: This model cannot accommodate column mounting when the distance of
lines A & B (in picture above) combined length is greater than 17 inches.
Technical
Specifications
DRIVE
- Powered
by a resilient 12 vt. DC motor.
- Temperature
rating of motor: -30 F To160 F
- Opening
time is 18-20 seconds.
- Range
of arm stroke is up to 24". Operator length with
arm fully retracted is 39", mounting point to mounting
point.
|
POWER
- The
PRO SW4000 system is powered by a 12 volt DC /7.0 amp
hour, sealed, recharageable battery.
- Battery
charge maintained by a 120 V AC/60 HTZ input and 18
V AC at 40. output, transformer recitified to 14 V DC
through the GTO Control Board.
NOTE: Transformer should never be connected directly to any
Battery. |
Optional: GTO Solar Panel Charger: Float voltage 14.5 V DC output
from a 19-3/8" x 15-1/4" silicon alloy panel.
Generates minimum of 10 watts at 600 mA. A gated diode on
the control board prevents battery discharge. |
CONTROLS
- The GTO control board
can be programmed for pull-to-open or push-to-open.
- Adjustable Auto Close,
obstruction sensitivity and dual gate sequencing.
|
- Auto-memorization of
digital transmitter code.
- Changing regulated circuit
on control board. "Sleep draw" is 40 mA; "Active
draw" is 2 to 5 amps.
|
- GTO remote-mounted RF
receiver tuned at 318 MHZ.
|
OPERATIONAL
CAPACITY
The PRO-SW4000XL will handle gates weighing up to 650 lbs.
and up to 16 ft. in length if all proper installation procedures
have been followed. Note that ball bearing hinges should
be used on all gates weighing over 250 lbs. |
GATE
CAPACITY CHART
(Estimated number of cycles per
day based on use with a transformer
1000
lb. |
115 |
110 |
105 |
100 |
900
lb. |
120 |
115 |
110 |
105 |
800
lb. |
125 |
120 |
115 |
110 |
700
lb. |
130 |
125 |
120 |
115 |
600
lb. |
135 |
130 |
125 |
120 |
500
lb. |
140 |
135 |
130 |
125 |
400
lb. |
145 |
140 |
135 |
130 |
300
lb. |
150 |
145 |
140 |
135 |
|
UP
to 10 ft |
12
ft. |
14
ft. |
16
ft |
|
Now
offering AFTER Warranty Service
on all GTO Operators.Call for details.
800-878-7829
AutomaticGateOpeners.Net
10050 Wellman Rd.
Streetsboro OH 44241
Phone: (800) 878-7829 Fax (330) 650-9004

|