|
|
OSCO
Model BGU
Lift Gate
for Control of Vehicle Traffic
 |
OSCO
Lift-Gate
Models BGU and BGU-D
can be used for parking applications and revenue control.
Through
switch selections, the gate operator is universal and suitable
for all installation and operational functions. Switch selection
allows for full flexibility as to how and when the arm comes
down in traffic control situations.
The
added advantage to the DC operator is the automatic-open
feature upon power loss. When the gate opener senses AC
power is no longer present, the arm will cycle open, remaining
open until AC power is restored (fail safe) OR continues
normal operation while monitoring the battery level. Once
the batteries are low the unit will cycle open until AC
power is restored or the batteries receive a full charge
(fail secure).
|
Specifications for the OSCO BGU Lift Gate
Operator
| Electrical
Specifications: |
Cabinet: |
- 1/3
hp, 115 VAC, single-phase, thermally-protected open-frame,
resilient-mounted PSC motor
- Power
on/off switc
- Duplex
receptacle (115 VAC units only)
- Three-button
control station included
- Accessory
connections are 24-volt AC or DC
- Easily
adjustable cam-operated limit switches
- Motor
has manually-resettable overload
- Full
system capable for access control and reversing devices
Mechanical:
- Dual
V-Belt
- Heavy-duty
right-angle oil bath gear reduction
- Heavy-duty
harmonic link with oil impregnated bronze bushings
- Gate
arm clamp with cutting bracke
Anti-Entrapment/Detection
Devices:
This
Lift gate is pre-wired to accept contact and non-contact
detection devices such as reverse edges and/or photo electric
eyes.
Control
Circuit:
- Solid
state circuit board, 24 VDC
- Inherent
current sensing system
- 15
LEDs for easy setup and troubleshooting
- Built-in
maximum run timer and auto close timer
- Master/Slave
- simple three-wire commenction
|
- Weather-resistant
galvannealed steel cabinet with powder coat finish
|
| Warning
Signals: |
- Pre-start
audio/visual outputs provided
|
| Options
for the BGU: |
- 230V,
single-phase operation
- Stainless
steel cabinet for installations in areas where high concentration
of corrosive materials is present
- Thermostatically-controlled
strip heater
- Arm
light kit
|
 |
Loop detector
are used with lift gates to detect the vehicle as either
a Free Exit Loop, reset loop, or a safty look. To install
cut theconcrete and lay the wire in and then run the wire
back to the operator and then caulk over the wire.
If you need
further assistance call our sales department at 800.878.7829
between the hours of 8:00 AM - 5:00 PM EST. or email us
at sales@discountfence.com.
|
Pricing for the OSCO BGU Barrier Gate Operator
| Model |
Application |
HP |
Voltage
Phase |
Shipping
Weight |
Arm
Size |
List
Price |
Order |
|
BGU-10-311
|
Parking
applications and
provisions for single_button,
detector, radio, and three button
|
1/3
|
115-1
|
200lbs
|
10
ft.
|
$2,085.00
|
|
|
BGU-12-311
|
Parking
applications and
provisions for single_button,
detector, radio, and three button
|
1/3
|
115-1
|
200lbs
|
12
ft.
|
$2,085.00
|
|
|
BGU-14-311
|
Parking
applications and
provisions for single_button,
detector, radio, and three button
|
1/3
|
115-1
|
200lbs
|
14
ft.
|
$2,125.00
|
|
| |
| Accessories
for the BGU |
| 2500-2207
- Low Voltage Surge suppressor ..................... $42.00
|
|
| 2510-262
- 115V Heater ............................................
$112.00 |
|
| 2800-111
- Articulating Arm for limited head room areas... $310.00
|
|
| 2650-057
- Adaption for shaft out opposite side............... $185.00
|
|
| 2650-088
- Adaption for opposite arm direction............... $20.00
|
|
2650-111
- Cold Weather Package ............................... $198.00
(includes heater, arctic oil, cogged belt) |
|
| Vehicle
Detectors for gate opening or reversing devices
|
Deteck
Look Detectors
2510-190 Single Detector prewired in operator, 24 VDC.....$270.00 |
|
| 2510-191
Two Detector prewired in operator, 24 VDC.....$530.00 |
|
|
Smart
Gate
SmartGate
Manufactures a non-contact parkinggate safety system.
SmartGate's patented "invisible field" moves
with aand precedes the closing edge of a gate, and detects
both people and vehicles! Systems are easily retrofitted
into existing or new gates in about an hour. SmartGate
does not require frequent adjustments or cleanings, and
is impervious to ice, snow and dust buildup
2510-347
SmartGate PBG-3 for Barrier Gates ............... $549.00
|
|
Related
Links:
Swing
Gate Operator Automatic Operators:
Slide
Gate Operator Automatic Operators
Barrier
Gates:
Accessories for Automatic Operators GTO Pro | OSCO
Discount
Fence Supply, Inc.
10050 Wellman Rd. Streetsboro OH 44241
Phone800/878-7829 ° FAX 330/650-9004
Automatic
gate openers are our business. Call us with further questions
we are pleased to serve you. (800) 878-7829
 |
Caution:
Barrier gates are not for pedestrians! Automatic gate operators
are designed for vehicular traffic only.Tthey are powerful
and can cause serious injury or death. Accordingly, direct
all pedestrian traffic to a separate pedestrian gate. UL325
requires the use of contact or non-contact anti-entrapment
devices. ASTM F2200 requires that all exposed
rollers are covered.
|
Automatic
gate openers are our business. Call us with further questions
we are pleased to serve you. (800) 878-7829
|