Varible Speed, Linear Drive Swing Gate Operator
Heavy Duty Industrial Use

The OSCO Model VS-GSWG is a heavy-duty variable speed swing gate operator designed for smooth, secure and reliable operation of large, heavy swing gates. The positive locking linear drive arm design provides enhanced security, plus increased ability to withstand high wind loads - especially important for large, heavy gates. The VS-GSWG features the same proven and reliable UL325/UL991 compliant solid state control circuitry as the rest of the OSCO family of gate operators and is available in 1/2, 1 or 2 HP, 115V-460V single- or three-phase power. The VS-GSWG utilizes an inherent current sensing system for entrapment protection and is listed for use in UL class I-IV applications.

Cabinet:	Electrical:
Weather-resistant galvannealed steel cabinet with powder coat finish Lockable, gasketed, hinged and removable front cover for easy	Variable speed - soft start/soft stop programmable through an inverter motor control (voltage & phase of input power supply required at time of order) Available from 1/2 to 2 hp industrial continuous-duty, three-phase, 56-frame motor Available in all standard voltages and phases Run timer for clutch and motor protection Delay on reverse Master/Slave capability built in Easily convertible right hand/left hand Solid state control circuit Double C-face brake Power on/off switch Duplex receptacle on 115 VAC units Three-button control station included Accessory connections are 24-volt AC or DC Easily adjustable rotary limit switches Full system capable for access controls and reversing devices
Mechanical:
Heavy-duty 60:1 right-angle C-face gear reducer Adjustable torque limiter Linear drive arm Heavy-duty pillow-block bearings
Mounting:
3 - 3 1/2" OD post mounting Optional pad mounting pedestal available
Manual Release:	Anti-Entrapment/Detection Devices:
Manual release is located inside the operator enclosur	Operator is pre-wired to accept contact and non-contact detection devices such as contact edges and/or photo electric eyes
Warning Signals:
Warning beeper to sound when gate is moving

Comparison chart for all our OSCO Swing Gate Openers

 

Ordering the VS-GSWG Swing Gate Operator:

Model	HP	Voltage	Phase	Type Drive	Maximum Gate Operator Width	Seconds to Open Gate	List Price		Order Now
Variable Speed - Industrial Slide Gate Opener
VS-GSWG-211	1/2	115	Single	Linear	45 ft	18-22 Sec.	$3,674.11
VS-GSWG-121	1	230	Single	Linear	40 ft	18-22 Sec.	$3,940.15
VS-GSWG-783	2	208	Three	Linear	36ft	18-22 Sec.	$4,415.69

2500-2015 - 100 ft. cable Master/Slave communication wire......... $75.00
Double-swing-- Two Operators required- Slave capability is built in
2500-2207 - Low Voltage Surge suppressor ...... $42.00
2510-262 - 115V Heater .............................. $112.00
2510-273 - 230V Heater .............................. $175.00
2520-354 - 460V Heater .............................. $250.00

Accessories
Interior Controls | Weather Tight Controls |
Radio Controls | Digital keypad Entry Systems
| Card Controls&Card Readers | Telephone Entry Systems
Vehicle Detectors | Time Delay Systems | Interface Controls
Photoelectric Controls | Electric Gate Edges | Intercom Systems |
Video Intercom Systems

Related Links:

Barrier Gates:

• BGU Barrier Gate for Parking and Revenue Control
• BGU-D Battery Backup Parking and Revenue Control Barrier Gate
• SG Barrier Gate Slower Operation Barrier Gate

Swing Gate Operator Automatic Operators:

• GTO Pro Commercial and Residential Gate Operators
• Model SWR Residential Swing Gate Opener
• SWD Battery Back-up Swing Gate Opener
• Model SWC Commercial Swing Gate Operator
• Model VS-GSWG Variable Speed Swing Gate Opener  

Slide Gate Operator Automatic Operators 

• SLC Commercial Slide Gate Opener
• SLR Light Duty Side Gate Operator
• GSLG-A Slide Gate Opener
• VS-GSLG Variable Speed Industrial Slide Gate Opener
• HSLG Heavy Duty Commercial Slide Gate Opener

Accessories for Automatic Operators GTO Pro | OSCO

 

Discount Fence Supply, Inc.
10050 Wellman Rd. Streetsboro OH 44241 
Phone800/878-7829 ° FAX 330/650-9004

Caution: Barrier gates are not for pedestrians! Automatic gate operators are designed for vehicular traffic only.Tthey are powerful and can cause serious injury or death. Accordingly, direct all pedestrian traffic to a separate pedestrian gate. UL325 requires the use of contact or non-contact anti-entrapment devices. ASTM F2200 requires that all exposed rollers are covered.

Automatic gate openers are our business. Call us with further
questions we are pleased to serve you. (800) 878-7829