Color: Black
Length: 4 foot (others available upon
special order)
Sensitivity: nominal 4 psi
Lead Wire: SJTO, 18 gauge, 10 ft. length
Wire Outlet Location: specify universal, right, or left
side
Electrical Requirements: 24 volt AC or DC, ½ amp
Electrical Diagram: 2 wire N.O. configuration Contact
Element: Alumaglas®
Materials: Base = rigid extruded PVC; Cover = flexible
PVC
Temperature Range: -30ºF to +155ºF |
The MGR20 and MGS20 were designed to minimize installation time
while offering customers the three-sided protection for the
leading edge of the gate. These edge sensors simply clip on
to the 2: frame. The rigid base extends beyond the sensitized
portion of the edge sensor to form mounting flanges. To mount,
drill 1/8" holes through the mounting flanges and into the gate
frame every 24". Permanently attach with #10 screws. Run wire
to the gate operator installation manual. Test the edge sensor
and inform the property owner of their obligation to regularly
test. When properly maintained, the MGR20 and MGS20 offer years
of trouble free service.
Note: For safe operation, use maximum 24 volt AC or DC power.
For detailed instructions, contact MillerEdge, Inc. |
